Using a BeagleBoard-xM for video
Set demo image
Update image on disk to http://beagleboard-validation.s3.amazonaws.com/deploy/201008201549/sd/list.html
Connecting to wireless network
opkg install wireless-tools
opkg install kernel-module-zd1211rw
opkg install zd1211-firmware
modprobe zd1211rw
iwconfig wlan0 mode managed
iwconfig wlan0 essid “2WIRE556”
iwconfig wlan0 key 6845155005
iwconfig wlan0 channel auto
ifup wlan0
ifconfig wlan0 up
udhcpc wlan0
Starting the camera
opkg install kernel-module-uvcvideo
opkg install ti-dmai
opkg install ti-cmem-module
modprobe uvcvideo
opkg install ffmeg
opkg install gstreamer-ti
opkg install gst-plugin-avi
opkg install gst-plugin-video4linux2
opkg install gst-plugin-videorate
opkg install task-gstreamer-ti
opkg install gst-plugin-udp
modprobe sdmak
modprobe cmemk
gst-launch v4l2src device=/dev/video0 ! video/x-raw-yuv,width=640,height=480,framerate=15/1 ! videorate ! avimux ! filesink location=video4.avi
http://processors.wiki.ti.com/index.php/Example_GStreamer_Pipelines
